Project of the Year: Golden Gate Bridge Suicide Barrier | Dump Trucks Charlotte NC

The Golden Gate Bridge Physical Suicide Deterrent System and Wind Retrofit Project will include the largest-scale installation of a bridge suicide net in the U.S. The additions and upgrades, designed by engineers at the Golden Gate Bridge, Highway and Transportation District and HNTB, will cost a total of $211 million. The project is remarkable due to the sheer challenge of the task as well as its potential to save lives.

The "net," being installed by crews from the joint venture of Shimmick Construction, an AECOM company, and Danny's Construction, is actually 385,000 square feet of marine-grade stainless steel that will be stretched across 555 tons of steel supports 20 feet out and 20 feet under most of the bridge's 1.7 mile span.

The Shimmick-Danny's JV, under a more than $142 million contract with an almost $28 million contingency, is building the entire project, scheduled for completion in 2021.

See more award winners here!

The project is a testament to compromise. Proponents, sure that a net or some other physical add-on would help stop the 30 or so people per year who end their lives by jumping off the San Francisco landmark, worked with those concerned about the aesthetic — and about how any major addition could affect the bridge's structural integrity — in order to find a design that served the intent yet did not detract from the beauty that draws millions of tourists each year.

In fact, much of the barrier system will be painted the same International Orange color as the Golden Gate, and its struts will be spaced 50 feet apart to blend in with the bridge's 250, 500,000-pound suspender ropes.  

In addition, the system is designed not to interfere with the bridge's maintenance and operation, a year-round endeavor that includes ironworkers constantly replacing corroding steel and rivets and painters ensuring that the ionic structure stays orange. There are approximately 200 operating engineers, mechanics, electricians, communications technicians and other skilled trades who columbus oh dump truck company on and around the bridge.

Golden Gate Bridge then and now

❮❯

As part of the project, Shimmick and Danny's will remove four maintenance travelers, replace them with 12 battery-powered travelers, and furnish and install 1,100 tons of rail girders to support the new units. The joint venture will also spot blast, clean and paint areas of the bridge disturbed by barrier construction.

Designers of the suicide barrier system had other requirements, such as making sure that it:

• Would not be a safety or nuisance hazard to those using the sidewalk under the bridge.
• Did not prevent bridge security officers from doing their jobs or blocking emergency access to the underside of the bridge.
• Complied with state and federal historic preservation laws.
• Did not create an injury risk to someone coming in contact with it.
• Would not interfere with the construction of a moveable median barrier.

The wind retrofit aspect of the project, which will be installed before the net system, had to address well-found concerns that the suicide barrier could change how the bridge responded to high winds, thereby making the Golden Gate potentially unstable. To solve this potential problem, the joint venture is building a 425-ton steel wind retrofit system along the main span on the west side of the bridge. Portland, Oregon-based Vigor is manufacturing components for both the net's steel support system and the wind retrofit.

Because of its scope, the project brought together a number of government groups for funding: $74 million from the Metropolitan Transportation Commission; $70 million from the California Department of Transportation (Caltrans); $60 million from Golden Gate Bridge, Highway and Transportation District revenue; and $7 million from the state's Mental Health Service Act.